FlashForge PA (Nylon) White 1kg

BENEFITS

1. Good tenacity, impact strength is 10 times more than normal lament, and breaking elongation is 50 times more than normal lament.
2. Good corrosion resistance, tolerates most organic solvents.
3. Good abrasive resistance.
4. Good aging resistance.
5. High transparency, and light transmittance is 90%.
6. High glossiness.
7. Temperature resistance, use for long time in the condition of 100℃.
8. High line precision, standard deviation of diameter 0.05mm.
9. Wide printing range, uent printing between 220~260℃.
10. No need heating build plate when printing models whose bottom are small so as to strengthen applicability of printers.

APPLICATIONS

1. Apply to print models that have special demand for using environment, such as engineering samples, etc.
2. Apply to print transparent, durable household articles, such as hook, vase, lampshade, etc.

PARAMETERS

1. Diameter: 1,75 mm
2. Printing temp range recommended: 220~240℃.
3. Printing temp range recommended when printing mini or thin-wall models: 220~230℃.
4. Printing temp range recommended when printing large models: 230~240℃.
5. Printing speed: 60~90mm/s.
6. Build plate temp: no need heating build plate when printing models whose bottom are small.
7. Build plate should be heated up to 80~100℃ when printing models whose bottom are large.
8. Printing substrate: non-required.
9. We suggest using perforated plate, not using heat resistant adhesive tape in order to reduce warping probability and ensure beauty and integrity of printing models.

TECHNICAL SPECIFICATIONS